1. Blockage of feed inlet and die hole of feed pelletizer may result in lower working efficiency of feed pelletizer.

 

If your feed granulator also has low output or unexpected situation, you can check whether the feed granulator feed outlet and screen are blocked. Generally speaking, the feed outlet of the flat-die feed granulator is vertical, so once blocked, it can be more intuitive to see, but for the ring model. For feed granulator, although there is a forced feeder, but in the narrow conditioner, it may also cause feed clogging.

 

 

 

The same is true for die hole blockage. Once the die hole is blocked, the slight cleaning is better. If the blocked area is large *** it is more troublesome. So we suggest that before using the feed granulator granulator, the oil should be used to pass through the feed granulator to ensure lubrication. Before finishing the granulation work, the oil should also be used to pass through the feed granulator once to prevent the die hole from blocking. Plug phenomenon.

 

 

 

2. The influence of feed material itself on the output of feed granulator

 

We know that the feed granulator belongs to the feed machinery that dries in and out. If the moisture content in the raw material is larger, the granules will not form. If the moisture content is too small, it will be difficult to be pressed together to form granules. Generally, we require that the moisture content of feed material should not exceed 12 in the granulation process. If the material is too dry, auxiliary equipment such as conditioner can be used.

 

 

 

3. The gap between the press roll and the ring die of the feed granulator is inappropriate, which results in the lower output of the feed granulator.

 

In feeding machinery, some accessories will wear after long-term use, such as hammer of feed mill and press roll of feed granulator. During the long-term backlog of feed, it is inevitable to suffer wear and tear. At this time,*** it is necessary to check whether the inside of ring die and press roll have been worn or not. The reason for the low output of feed granulator is concluded.

 

 

 

4. Low voltage may also cause the output of feed granulator.

 

General farmers are located in remote areas with *** distance from the village, the voltage used may be unstable, so if the above possibilities are excluded, we can see the effect of granulation at the peak of electricity consumption. If the feeding time is slower, the granulation speed is faster, and it can be appropriate. When adjusting, or call the manufacturer of the feed granulator to answer the question.