Some customers consult us when purchasing double shaft shredder, the reason of strong vibration occurred during the operation of the machine. As a shredder manufacturer, what cause the strong vibretion? What shoule we do?

A. The double shaft shredder are arranged between the corresponding weight difference of more than 5 grams. The elimination method is to adjust the weight of the tool so that the difference between the two groups of weight is less than 5 grams.

B. Other parts of the rotor weight imbalance, the need to carefully check the balance adjustment.

C. Double shaft shredder tool card tool card is too tight, can not disconnect the operation. You can stop by rotating your hand and find a way to ratate the elastic hammer.

D. Repair the installation error of shredder blade during installation. Blades are used face to face, in order to preventweight loss of balanced rotor, all double -shaft shredders must face u-turn, or strong vibration will occur in operation.

E. Biaxial shredder spindle bending deformation. The solution is to straighten or replace.

F. Bearing clearance exceeds limit or is damaged. Usually replace the bearing to solve the problem.Bearing clearance exceeds limit or is damaged. Usually replace the bearing to solve the problem.

There are many reasons for the dither of the double shaft shredder machine, first we have to do is not panic not noise, then make the shredder machine stop to check each part, and then confirm the basic situation, speed down, slow operation of the machine, if you can operate normally, then you can add appropriate soft waste for trial operation. When everything works, the problem can be solved.