Wood crusher in the work must pay attention to safety, many operators think that the machine in the work as long as the machine does not touch the dangerous parts will not create personal harm, this idea is not right, wood crusher in the work of non-contact dangerous parts will be relatively safe, but there are many places to pay attention to.

Wood crushers are not available to the machine when the staff are working.Some workers with gloves to feed the machine is a certain danger, will encounter wood too long front into the back hanging gloves, may be dangerous events, workers in the wood crusher work to avoid the direction of the hammer rotation, metal hammer piece is more sharp. Try to avoid the hammer chip rotating tangent slot where to prevent the hammer piece flyout to the workers harm, the general wood shredder will not appear this situation, but when the long-term work of the machine some parts loose, coupled with long-term maintenance is not in place, can not guarantee that no accident will occur.

The fixation of the wood crusher is also very important, if the long-term fixed work of the wood shredder does not need to move, try to fix the machine on the ground, if the machine often move the machine to fix the iron base, screws and pulleys everywhere need to be checked to avoid accidents at work. Do not change the pulley or mediate the tightness of the pulley at will during normal production, which will affect the machine speed and avoid the danger of too high or too low speed.