The raw materials of wood cruhser for a variety of waste wood, basically as long as wood can be turned into sawdust, not only to reduce the environmental hazards of garbage, but also to a great extent waste for treasure to obtain benefits.

Wood cruhser relative to the metal cruhser, its service life will grow some, because the wood is soft, easy to break, so the equipment wear will be relatively smaller, but some nails in wood furniture, iron blocks, etc. will also cause some trouble to the machine, today we will simply say a few common wood shredding production failure.

Long-term production will loosen the connection between the fuselage and the ground, the screws and rivets will be greatly worn, and the welding method must be used for repair, which is already an unreplaceable premise. Body vibration and balance, both of which are generated by long-term machine work, because each boot production will put pressure on each fixed bolt and link device, so the accumulation of long time, will also make the link loose, the body vibration will become more intense.

Too much impurities in the wood, resulting in wood cruhsers are often stuck, many because the wood is not screened clean, resulting in some iron blocks doped, hit the blade or card machine, resulting in a sharp decline in blade life. Problems must be solved in time.